Epoxy Coal Tar Black
  • Home
  • Epoxy Coal Tar Black

We are Manufacturer, Supplier, Exporter of Epoxy Coal Tar Black from Pune, Dehu, Maharashtra, India.

EPOXY Anticorrosive Primer is recommended for use on steel structures, traction batteries, chemical plants, and MS tanks.


Features :

  • Excellent Chemical Resistance
  • High Performance Corrosion Control
  • Quick Drying
  • Can be applied on wet surface

Physical Properties:

Colour Shade Black
Volume Solids 55 (± 5%)
D.F.T. 30 to 40 microns
Theoretical spreading rate 9 to 10 sq. meter @ D.F.T. 25 µ
Flash point Base - 260C; Hardner - 280C
Sp. Gravity Base 1.25 (± 0.1 ) kg per Ltr. Hardner 0.85 (± 0.05) kg / Ltr

TP Epoxy Coal Tar Black

Request A Quote

Application:

  • Application Conditions: Ambient temperature shall be above 100C and relative humidity shall be below 85%. Adequate ventilation shall be provided in confined spaces
  • Mixing: Stir each component with mechanical stirrer before mixing
  • Mixing ratio: Paint: 4 parts, Hardner: 1 part , Thinner : 1.5 parts (by volume)
  • Application method: By air assisted spray gun / airless spray gun
  • Pot Life: Minimum 6 hours at 300C (Pot life may be reduced at higher temperature)
  • Drying Time: Surface Dry - 20 to 30 minutes, Touch Dry - 4 to 5 hours
  • Typical undercoat: Epoxy Primer
  • Shelf Life: Base: 06 months; Hardner : 06 months from the date of mfg.

Surface Preparation :

  • Surface to be coated should be completely clean, dry and free from contamination.
  • Remove oil & grease with suitable solvent or detergent.
  • Remove rust, mill scale and other loose material by wire mesh / abrasive blasting.

Performance Properties :

  • Acid / Alkali Resistance - for 10% solution - 24 hours
  • Salt Spray - passes 300 hours

Request A Quote